How to Install Made to Measure Roller Blinds

We’ve made installing roller blinds easy. Follow our three simple steps below and your new made to measure roller blinds will be installed in no time. More of a visual learner? Our YouTube tutorial is also ready for you to follow step-by-step. Our roller blinds can be installed onto the ceiling or into the wall - - - the choice is yours.

  1. Measure the width of your blind and mark each end in line with your installation height. Your roller blind is designed to fit snug inside the brackets. Make sure the bracket with the cross on is on the side you’d like the roller blind chain to be.
  2. Our roller blind brackets can be screwed onto your wall or your ceiling. Use your brackets to mark your drill holes and carefully drill your holes.
  • Brick walls: Use a 5.5mm masonry drill bit, and insert rawl plugs
  • Plasterboard walls: Use an ordinary 5.5mm drill bit and insert rawl plugs
  • Wood frames: Use an ordinary 2mm drill bit to create a pilot hole
  1. Clip your blinds into the brackets by placing the spring-loaded pin in the hole and hook the chain end into the cross.

Drill bit comparison

02 Ceiling

02 Wall

03

Ready to design your next room?

Use our handy online measuring guides and order your next made to measure roller blind.

SHOP ROLLER BLINDS